The bike was heavily pedaled. How to make power bike run faster.

Heavy-duty pedaling is one of the most common problems. To overcome this situation, it is necessary to apply some tips that not everyone knows. This article will share tips to help bicycles run faster efficiently and easily.

1. Reason:

Power-assisted bicycles are heavily pedaled due to a few reasons such as:
The car is going to brake
Components used for too long
Pressure in the tire
Suspension fork,...

See also: ADO A26S . Bicycle

2. There are a few ways to make your bike run faster.
3. Limit braking

This is one of the reasons why your bike becomes heavy when pedaling. When the brake pads are friction with the disc. This causes you to pedal with a lot of effort.
The way to make the bicycle pedal lighter is: Check by lifting the wheel and allowing it to spin freely. If the wheel only turns a few turns and then stops, you need to fix this problem. Avoid wasting energy as well as affecting the speed of the bike every time you pedal.
Adjust the brake pads to be aligned, straight without rubbing against the disc or wheel rim.

2. Tighten the screws

A power-assisted vehicle that is used for a long time without regular maintenance is easy to fall into a loose, bent and misaligned condition. So check the screw positions on the car and tighten them.
This not only ensures your safety, but also helps the car operate more efficiently and faster.
At the same time, you must not neglect the parts that need to be lubricated on a regular basis. Brake cables and starter cables also need to be properly secured and lubricated.

3. Upgrade the wheel

One of the ways to make power-assisted bicycles run faster is to upgrade the wheels.
Wheels with rims made of strong and lightweight materials will run faster. In addition, more modern upgraded bearings also play an important role in overcoming the situation of heavy pedaling.
You might consider replacing the wheels with rims with aluminum alloy or more premium carbon ones. From there, your car will also operate smoother and softer.

See also: ADO A20F . bike

4. Adjusting the fork

The response speed of the fork is also a factor you need to pay attention to to overcome the situation of the power-assisted bicycle being heavily pedaled. When the car goes fast, the fork needs to react faster. But if it works too slowly, it will cause the car to stall when crossing bad terrain and run slower.
The fix is ​​that you need to experience your car many times on familiar roads. Then feel the bounce and gradually adjust the fork to the most optimal level according to your wishes.

5. Ensure good tire pressure

If your tires have low pressure, the bike is heavily pedaled, resulting in more power loss.
Therefore, you need to regularly check tire pressure and adjust accordingly. You need to base on the terrain you often move, the material of the rims and tires, the way you ride your bike, your weight, the temperature... to decide the right tire pressure.
City bike tires are typically between 50 - 70 psi, road bikes are 80 to 130 psi, and mountain bikes are 25 - 35 psi. You should try driving the car at different pressure levels to find the pressure number that works best for you.

Above, is the reason why your bike is heavy pedal as well as how to make the bike lighter. Good luck with your application!